Concept Development 3

The final stage of the development was the sourcing of the dimensions of the stainless steel section from my supplier. After going through the range of RHS and the varying wall thicknesses and the suitable size of 50x 25mm with a wall thickness 1.6mm was selected. This meant that the radius of the corners would be 25mm and a section of pipe would also be needed.

The image shows the front section of the chair with the radius corners

The image above shows how the chair would be constructed through the cross sections. The front section of the chair required a 'V' shape section of material to run across the front face to keep the face flush.

The rear legs have the same on the back face for the same purpose. With the timber housings welded to the reverse sides.